What to charge to install hot tub disconnect and 50a gfci circuit
This is outdoor, EV and generator work - the growth end of residential, priced by distance, weather sealing and load. Figure about 6 hours on a Normal run, with roughly $420 of material at contractor cost before markup. At a $120/hour shop rate - the worked example we use across this site - the flat-rate math for "install hot tub disconnect and 50a gfci circuit" comes out like this:
| Easy | everything cooperates: good access, sound wiring, no surprises | $1,105 |
| Normal | the typical version of this job in an occupied home | $1,245 |
| Hard | poor access, aged or altered wiring, extra protection or staging | $1,500 |
Same math: hours x grade x your rate, plus material at 25% markup, rounded up to $5. Don't know your rate? Find it free in two minutes.
What makes this job Easy or Hard
Outdoor and high-load work grades on distance and on everything between the panel and the endpoint. Easy is short and sheltered: an EV outlet on the same wall as the panel, an inlet box beside the meter. Normal covers typical garage runs, modest trenches someone else dug and ordinary weather-sealing. Hard is long runs, finished space between panel and destination, panel upgrades hiding inside "just add a charger" requests, and anything where load calculation says the service is already near its limit. EV work especially deserves a load calc before you quote - the charger is easy, the spare capacity often is not. Generator interlocks and transfer switches grade on panel condition and conductor room. Underground work depends entirely on who trenches and what the soil hides; put trenching, conduit depth and restoration in writing. Hot tubs add GFCI, disconnect placement rules and wet-location discipline. Outside, every termination is a future corrosion call unless you seal it like you mean it.
Don't forget
Permit territory: this category often requires a permit and inspection. Price the permit as its own line and count the scheduling time as real labor.
Many jurisdictions require permits for EV circuits, generators and hot tubs - line-item the permit, and do the load calculation before you commit to a price.
Questions
Why is there a price range instead of one number?
Distance from the panel, what is between the panel and the endpoint, and available service capacity move these jobs between grades - the endpoint hardware is the small part.
Can my panel handle an EV charger?
Only a load calculation says for sure. If the service is near capacity, the honest quote includes freeing capacity or an upgrade - which is why this work is quoted after a look at the panel, not from a text message.
Related outdoor, ev & generators prices
- What to charge to install nema 14-50 outlet for level 2 ev charger (within 20 ft of panel) - $805 Normal
- What to charge to install hardwired level 2 ev charger (within 20 ft; charger by customer) - $975 Normal
- What to charge to install exterior gfci receptacle with in-use cover - $240 Normal
- All 75 flat-rate task prices
Want the whole book instead of one page at a time? TheFlat-Rate Price Book Builder generates all 75 prices from your own overhead and rate - $39, Excel and Google Sheets.